Olight Baldr Pro R Weapon Light and Laser

Olight Baldr Pro R Weapon Light and Laser 1350lm

The Olight BALDR Pro R combines a highly effective weapon light and laser sight for pistol and rifle use. In addition to its remarkable brightness of 1350 lumens and range of 200 meters, it also includes a green laser sight that is naturally adjustable. Thanks to its robust construction and sturdy adjustment screws, the sighting remains accurate even if the light is subjected to impact. The Baldr Pro R is equipped with Olight's well-known, user-friendly, and durable quick-release mechanism, which allows the light to be attached or detached from the rail in seconds without tools. Unlike many similar weapon light and laser sight combinations, the Baldr Pro R integrates the laser into the same reflector as the light, eliminating the need for a separate laser module below the light. This solution reduces weight and significantly minimizes the space required. Additionally, integrating the laser allows for a magnetic connection port to be added to the light's body, enabling both charging and connection for a magnetic remote switch for longer firearms.

The Baldr Pro R features a user switch that is a cleverly designed dual switch, allowing for operation from the most convenient location for you. The user switch is positioned on both sides of the light, with identical functions on both switches: the switch can be pressed easily from either the rear or the sides. This allows versatile use of the light with various shooting grips and placements. Users can conveniently select the light source (white light, light + green laser, or just laser) using the adjustment knob located at the front of the light, ensuring the light does not accidentally activate in the wrong mode. The Baldr Pro R's built-in 1000 mAh Li-Po battery provides 54 minutes of runtime at full power, and when used in the lower 300 lumens mode, it provides a continuous burn time of 93 minutes. The beam pattern combines a perfect spot with a broad floodlight, achieving a range of 200 meters with the spot while the floodlight illuminates close areas very widely with lower brightness.

This light is ideal for both professional and recreational use with pistols and longer firearms. It is compatible with most Surefire X300 light holsters.

Features:

• Intended Use: Weapon light + green laser sight
  
• Lumens: 1350 lm
  
• Laser Power: 5 mW
  
• Maximum Range: 200 m
  
• Operating Modes: 3 (1350 lm - 300 lm - strobe)
  
• Power Source: 3.6V 1000 mAh Li-Po battery
  
• Switch Type and Location: Tactical side switch (also momentary use)
  
• Compatible with both Picatinny (Mil-std-1913) and GL rails
  
• Material and Color: Type III hard-anodized Mil-Spec aluminum, black
  
• Dimensions: 95 x 36.6 x 34.1 mm (L x W x H)
  
• Weight: 126 grams
  
• Waterproof Rating: IPX4
  
• Impact Resistance: 1 m
  
• Warranty: 60 months
• Includes an adapter for both Glock rail and Picatinny rail
• Magnetic charging
• Compatible with most Surefire X300 holsters

Runtime (Manufacturer's Specs)
High (Laser On): 1350-500-300 lm / 1.5 + 38 + 10 min / 260 m
High (Laser Off): 1350-500-300 lm / 1.5 + 40 + 13 min / 260 m
Low (Laser On): 300 lm / 85 min
Low (Laser Off): 300 lm / 93 min
Laser Only: 19 h

Quick Guide
You can choose the mode for just light, light + laser, or laser only. Modes are selected using the rotary switch at the front of the light.
The light comes with a lockout feature (switch press activates the light momentarily at 100 lumens), which can be deactivated by holding both switches for 2 seconds. The lockout can be reactivated by pressing one switch while holding it down, then after half a second, pressing the other switch down for about two seconds.
The light turns on (in previously selected mode) and off by pressing either switch once. Momentary use is possible by pressing the switch long while the light is off.
Strobe function can be activated by pressing both switches simultaneously.
Mode switching is done by double-clicking either switch while the light is on. The light remembers the last used power level and will turn on at that level next time.
While the light is off, double-tap either switch to switch to a higher output mode.